RESUMO Objetivo: Determinar a prevalência da deficiência de alfa 1-antitripsina (AAT), bem como a frequência alélica, em pacientes com DPOC no Brasil. Métodos: Estudo transversal com 926 pacientes com DPOC, com 40 anos ou mais, oriundos de cinco estados brasileiros. Todos os pacientes foram submetidos a dosagem de AAT em amostras de sangue seco por meio de nefelometria. Aqueles em que a concentração de AAT no sangue seco foi ≤ 2,64 mg/dl foram submetidos a dosagem sérica de AAT. Aqueles em que a concentração sérica de AAT foi < 113 mg/dl foram submetidos a genotipagem. Quando os resultados foram discrepantes, foi realizado o sequenciamento do gene SERPINA1. Dos 926 pacientes com DPOC estudados, 85 apresentaram concentração de AAT em sangue seco ≤ 2,64 mg/dl, e 24 (2,6% da amostra) apresentaram concentração sérica de AAT < 113 mg/dl. A distribuição genotípica nesse subgrupo de 24 pacientes foi a seguinte: PI*MS, em 3 (12,5%); PI*MZ, em 13 (54,2%); PI*SZ, em 1 (4,2%); PI*SS, em 1 (4,2%); e PI*ZZ, em 6 (25,0%). Na amostra estudada, a prevalência global da deficiência de AAT foi de 2,8% e a prevalência do genótipo PI*ZZ (deficiência grave de AAT) foi de 0,8%. Conclusões: A prevalência da deficiência de AAT em pacientes com DPOC no Brasil é semelhante àquela encontrada na maioria dos países e reforça a recomendação de que se deve medir a concentração de AAT em todos pacientes com DPOC.

ABSTRACT Objective: To determine the prevalence of alpha 1-antitrypsin (AAT) deficiency (AATD), as well as allele frequency, in COPD patients in Brazil. Methods: This was a cross-sectional study involving 926 COPD patients 40 years of age or older, from five Brazilian states. All patients underwent determination of AAT levels in dried blood spot (DBS) samples by nephelometry. Those with DBS AAT levels ≤ 2.64 mg/dL underwent determination of serum AAT levels. Those with serum AAT levels of < 113 mg/dL underwent genotyping. In case of conflicting results, SERPINA1 gene sequencing was performed. Results: Of the 926 COPD patients studied, 85 had DBS AAT levels ≤ 2.64 mg/dL, and 24 (2.6% of the study sample) had serum AAT levels of < 113 mg/dL. Genotype distribution in this subset of 24 patients was as follows: PI*MS, in 3 (12.5%); PI*MZ, in 13 (54.2%); PI*SZ, in 1 (4.2%); PI*SS, in 1 (4.2%); and PI*ZZ, in 6 (25.0%). In the sample as a whole, the overall prevalence of AATD was 2.8% and the prevalence of the PI*ZZ genotype (severe AATD) was 0.8% Conclusions: The prevalence of AATD in COPD patients in Brazil is similar to that found in most countries and reinforces the recommendation that AAT levels be measured in all COPD patients.

OBJETIVO: Validar e desenvolver um método de dosagem de alfa-1 antitripsina (AAT) por imunonefelometria em amostras de sangue em papel-filtro em pacientes com DPOC no Brasil. MÉTODOS: Amostras de soro e de sangue em papel-filtro de 192 pacientes com DPOC foram utilizadas para a dosagem de AAT. Para a preparação das amostras de sangue em papel-filtro, um disco do papel com diâmetro de 6 mm foi colocado em um tubo e eluído com 200 µL de PBS, permanecendo por toda a noite a 4ºC. Todas as amostras foram analisadas em duplicata por imunonefelometria. O método de reamostragem bootstrap foi utilizado para a determinação de um ponto de corte para o nível de AAT nas amostras de sangue em papel-filtro. RESULTADOS: O coeficiente de correlação entre os níveis de AAT em soro e em sangue em papel-filtro foi de r = 0,45. Para as amostras em papel-filtro, o ponto de corte foi de 2,02 mg/dL (IC97%: 1,45-2,64 mg/dL), com sensibilidade, especificidade, valor preditivo positivo e valor preditivo negativo de 100%, 95,7%, 27,2% e 100%, respectivamente. CONCLUSÕES: Este método de determinação dos níveis de AAT em sangue em papel-filtro se mostrou uma ferramenta confiável para o rastreamento de pacientes com deficiência de AAT.

OBJECTIVE: To validate and develop an immunonephelometric assay for the determination of alpha-1 antitrypsin (AAT) levels in dried blood spots from COPD patients in Brazil. METHODS: We determined AAT levels in serum samples and dried blood spots from 192 COPD patients. For the preparation of dried blood spots, a disk (diameter, 6 mm) was placed into a tube, eluted with 200 µL of PBS, and stored overnight at 4ºC. All of the samples were analyzed by immunonephelometry in duplicate. We used the bootstrap resampling method in order to determine a cut-off point for AAT levels in dried blood spots. RESULTS: The correlation coefficient between the AAT levels in serum samples and those in dried blood spots was r = 0.45. For dried blood spots, the cut-off value was 2.02 mg/dL (97% CI: 1.45-2.64 mg/dL), with a sensitivity, specificity, positive predictive value, and negative predictive value of 100%, 95.7%, 27.2%, and 100%, respectively. CONCLUSIONS: This method for the determination of AAT levels in dried blood spots appears to be a reliable screening tool for patients with AAT deficiency.

OBJECTIVE: This study evaluated the surface hardness of a resin cement (RelyX ARC) photoactivated through indirect composite resin (Cristobal) disks of different thicknesses using either a light-emitting diode (LED) or quartz tungsten halogen (QTH) light source. MATERIAL AND METHODS: Eighteen resin cement specimens were prepared and divided into 6 groups according to the type of curing unit and the thickness of resin disks interposed between the cement surface and light source. Three indentations (50 g for 15 s) were performed on the top and bottom surface of each specimen and a mean Vickers hardness number (VHN) was calculated for each specimen. The data were analyzed using two-way ANOVA and Tukey-Kramer test was used for post-hoc pairwise comparisons. RESULTS: Increased indirect resin disk thickness resulted in decreased mean VHN values. Mean VHN values for the top surfaces of the resin cement specimens ranged from 23.2 to 46.1 (QTH) and 32.3 to 41.7 (LED). The LED curing light source produced higher hardness values compared to the QTH light source for 2- and 3-mm-thick indirect resin disks. The differences were clinically, but not statistically significant. Increased indirect resin disk thickness also resulted in decreased mean VHN values for the bottom surfaces of the resin cement: 5.8 to 19.1 (QTH) and 7.5 to 32.0 (LED). For the bottom surfaces, a statistically significant interaction was also found between the type of curing light source and the indirect resin disk thickness. CONCLUSION: Mean surface hardness values of resin cement specimens decreased with the increase of indirect resin disk thickness. The LED curing light source generally produced higher surface hardness values.